Epoxy Floor Paint

Description

Appearance: According to customer

Water-based/Oil-based: Water-based/Oil-based

Packaging/Specifications: 20KG

Features

Features/Technical Description

High Strength and Wear Resistance: After cross-linking and curing, it forms a dense film layer that resists mechanical impact and abrasion, making it suitable for areas with medium and heavy equipment.

Seamless and Easy to Clean: Self-leveling properties create a seamless surface, block liquid penetration, and withstand frequent washing.

Good Chemical Resistance: Stable resistance to oils, grease, low- to medium-concentration acids and bases, and organic solvents (such as diesel and ethanol).

High Decorative Properties: A wide range of colors are available, and quartz sand/metal aggregates can be added for anti-slip and anti-static properties.

Excellent Adhesion: Forms a chemical bond with the concrete base, with bond strength significantly higher than that of ordinary coatings.

High Application Maturity: Supports various application methods such as troweling, brushing, and spraying, and the technology is widely adopted.

Application scenarios

Manufacturing: Electronics factories, automotive assembly plants, and machining areas (requires oil and dust protection)

Warehousing and logistics: Warehouses with high forklift traffic and container yards (resistance to heavy loads and chain marks)

Pharmaceutical and food: Packaging plants and cold storage warehouses (requires seamless, clean surfaces, suitable for water-based epoxy)

Commercial spaces: Supermarkets, exhibition halls, and underground parking lots (balanced decorative and functional requirements)

Specialty requirements: Hospital operating rooms (antibacterial), computer rooms (static dissipation), and chemical plants (enhanced acid resistance)

Precautions

Surface Preparation:

Ensure the surface is flat, dry, and clean, free of oil, dust, loose particles, and other debris. Newly laid cement floors should be allowed to fully cure and dry, generally recommended for at least 50 days. Cleaning with dilute hydrochloric acid may be necessary to prevent alkali reversion.

Material Preparation:

Epoxy floor paint is typically a two-component material that requires thorough mixing according to the proper proportions. The mixed materials must be used within the specified timeframe to prevent gel degradation.

Environmental Conditions:

The humidity and temperature of the application environment affect the application and curing of the floor paint. Humidity should be kept below 85%; temperatures should ideally be between 10-35°C. Avoid application in high or low temperatures.

Precautions during application:

Avoid low temperatures and high humidity:

Low temperatures and high humidity can prolong the curing time of floor paint, making it more likely to cause bleeding and delamination.

Apply evenly:

Avoid applying too thick a coat, as this can slow drying and cause blistering. Wait for each coat to dry thoroughly and sand thoroughly before applying the next.

Preventing bleed:

Make sure the primer is completely dry before applying the topcoat, and pay attention to the color matching of the primer and topcoat to avoid color bleeding..

Prevent whitening:

Avoid construction when the air humidity is too high or the ground is wet to prevent whitening..

Apply tools:

Use appropriate tools, such as rollers and scrapers, and keep them clean.

Ventilation:

Maintain good ventilation during application, especially in enclosed spaces such as underground garages.

Safety measures:

Pay attention to safety during application, wear protective equipment, and avoid contact with skin and eyes.