Description
Cuplock face braces are used to provide lateral stability to the scaffolding system, preventing it from swaying and laterally displacing due to the weight of workers, equipment and materials during windy conditions. They are typically installed in a vertical position, parallel to the face of the building and fit different scaffold configurations.
From a structural standpoint, these braces are preferred over placing a clamp on diagonals.
|
Code |
Description |
Material |
Finish |
|
CFB1219 |
Face Brace 4'(1219mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 |
H.D.G/Powder Coating |
|
CFB1524 |
Face Brace 5'(1524mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CFB1800 |
Face Brace 5'10"(1800mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CFB2130 |
Face Brace 7'(2130mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CFB2440 |
Face Brace 8'(2440mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CFB2500 |
Face Brace 8'2"(2500mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CFB2740 |
Face Brace 9'(2740mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CFB3050 |
Face Brace 10'(3050mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
Reviews
There are no reviews yet.